Exterior steel structures
The steel profiles were first thoroughly cleaned and prepared with Power Coat Wash and Degrease. All the steel was then primed with Power Coat Adhesion Primer. To achieve the correct fire class, the best possible result and quality, the fire-retardant paint Firetex FX2002 was used on the exterior steel. To provide a good protective coating and the right color for the housing association, Power Coat 3 in 1, RAL 7011 was used as a topcoat.
Challenges:
The project involved cleaning the steel and removing old fire-retardant paint, which turned out not to have been applied correctly by a contractor, before re-treating with fire-retardant paint and applying a top coat.
A painting company was chosen to paint the steel structures in the condominium, so that both the stairs and hallways maintained fire class R30.
System structure:
√ Power Coat Wash and Degrease
√ Pretreatment for C St 2
√ Power Coat Adhesion Primers Special
√ Firetex FX2002 to fire class R30
√ Power Coat 3 in 1 RAL 7011
Product
Markets
Brochures
News
-
Monoguard – nå BREEAM-NOR 6.0 HEA 02-godkjent
Vi hadde stor tro på at Monoguard ville bestå kravene…
-
Slitesterk overflate på snøfresere og lignende utstyr
Løsemiddelbasert maling til maskin og utstyr Maskiner og utstyr som…
-
Prolan – naturlig og effektiv korrosjonsbeskyttelse
Prolan er en serie lanolinbaserte produkter for beskyttelse mot rust,…
-
Power Coat på befaring – brannsikkerhet
Power Coat sjekker brannmaling – trygghet starter med riktig utført…