| Title : | Piping and Valves | Doc. No. | L-001 | Annex: | E | Valve Data Sheet | PGKX90X |
| Project : | Company : | Rev.Date : | 20.09.99 | Rev. : | 2 | ||
| Valve Type | End To End Standard | End Type 1 | End Type 2 | End Standard | Size From (in) | Size To (in) | Notes |
| PLUG VALVE | MANUFACTURERS STANDARD | FS | FS | WECO FIG.1002 | 1.00 | 4.00 | |
| Notes | ||
| Pressure Rating | 10000 PSI | |
| Design Code | API 6A | 123 |
| General Requirement | VSK V402 | 264 |
| Leak Test | VSK V101 | |
| Marking | VSK V003 | |
| Operator | VSK V004 | 264 |
| Max Design Pressure | Barg | 690.0 | 690.0 |
| At Temperature | Deg. C | -29 | 80 |
| Subject/Item | Design and Material Requirement | Material | MDS | EDS |
| BODY/BONNET | One piece, top or bottom entry, "screwed" bonnet. Grease fitting for plug lubricant | A788 AISI 4140 | X02 | |
| INSIDE TRIM | Seat: Renewable seat/seal segments | STEEL | |
|
| PORT | Full bore, through conduit | |
|
|
| STEM | |
|
|
|
| CLOSURE MEMBER | Cylindrical balanced plug | STEEL | |
|
| SEALS | O-ring design or packed gland for stem sealing; Material according to EDS | |
|
NSM1 |
| LIP SEAL | Material according to EDS | |
|
NSM1 |
| OUTSIDE TRIM | |
|
|
|
| BOLTING | Material according to EDS | |
|
NBO2 |
| SPECIAL REQUIREMENTS | Design for throttling application in erosive service; Wetted parts suitable for sour service to NACE MR0175 | |
|
|
| 123 | SIZE RANGE TO ASME B36.10. |
| 264 | SHALL ALSO APPLY FOR 1" SIZES. |