| Title : | Piping and Valves | Doc. No. | L-001 | Annex: | E | Valve Data Sheet | GTAK10R |
| Project : | Company : | Rev.Date : | 20.09.99 | Rev. : | 2 | ||
| Valve Type | End To End Standard | End Type 1 | End Type 2 | End Standard | Size From (in) | Size To (in) | Notes |
| GATE VALVE WEDGE | ASME B16.10 | RF | RF | ASME B16.5 | 2.00 | 24.00 | |
| GATE VALVE WEDGE | ASME B16.10 | RF | RF | MSS SP-44 | 30.00 | 36.00 | |
| Notes | ||
| Pressure Rating | CL 150 | |
| Design Code | API 600 | 135 |
| General Requirement | VSK V402 | |
| Leak Test | VSK V101 | |
| Marking | VSK V003 | |
| Operator | VSK V014 | |
| Max Design Pressure | Barg | 19.0 | 19.0 | 19.0 |
| At Temperature | Deg. C | -29 | 38 | 90 |
| Subject/Item | Design and Material Requirement | Material | MDS | EDS |
| BODY/BONNET | Bolted bonnet | UNS C95800 | KO2 | |
| INSIDE TRIM | |
|
|
|
| PORT | |
|
|
|
| STEM | Rising stem. Outside screw and yoke | UNS N05500 | |
|
| CLOSURE MEMBER | Gate: Flexible wedge | UNS N05500 | |
|
| SEATS | Renewable | PTFE/UNS N0625 | |
|
| SEALS | Packed gland | |
|
|
| STEM PACKING | Expanded graphite not less than 98% purity | |
|
|
| OUTSIDE TRIM | |
|
|
|
| BOLTING | Material according to EDS | |
|
NBO2 |
| HANDWHEEL | |
|
|
|
| SPECIAL REQUIREMENTS | Suitable for seawater service. All material to be in accordance w/ relevant material codes/standards | |
|
|
| 135 | SIZES >24" SHALL COMPLY TO ASME B16.34 AND ALL REQUIREMENTS IN API 600 WHICH ARE NOT SIZE DEPENDENT. |