| Title : | Piping and Valves | Doc. No. | L-001 | Annex: | E | Valve Data Sheet | GTFD00J |
| Project : | Company : | Rev.Date : | 20.09.99 | Rev. : | 3 | ||
| Valve Type | End To End Standard | End Type 1 | End Type 2 | End Standard | Size From (in) | Size To (in) | Notes |
| GATE VALVE WEDGE | ASME B16.10 | RJ | RJ | ASME B16.5 | 0.50 | 0.75 | 044 |
| GATE VALVE WEDGE | ASME B16.10 | RJ | RJ | ASME B16.5 | 1.00 | 1.50 | |
| Notes | ||
| Pressure Rating | CL 1500 | |
| Design Code | API 602 OR BS 5352 | |
| General Requirement | VSK V407 | |
| Leak Test | VSK V007 | |
| Marking | VSK V003 | |
| Operator | VSK V009 | |
| Max Design Pressure | Barg | 258.6 | 258.5 | 256.3 | 245.9 | 228.9 | 213.1 | 200.9 |
| At Temperature | Deg. C | -46 | 38 | 50 | 100 | 150 | 200 | 250 |
| Subject/Item | Design and Material Requirement | Material | MDS | EDS |
| BODY/BONNET | Bolted bonnet | A182 F51 | D44 | |
| INSIDE TRIM | |
|
|
|
| PORT | |
|
|
|
| STEM | Rising stem. Outside screw and yoke | A182 F51 | D44 | NIP1 |
| CLOSURE MEMBER | Gate: Solid wedge; For sizes 6" and below, use material type 316 SS or Nickel alloy 625, both with hardfacing | A182 F51 | D44 | NHF1 NIP1 |
| SEATS | For sizes 6" and below, use material type 316 SS or Nickel alloy 625, both with hardfacing | A182 F51 | D44 | NHF1 NIP1 |
| SEALS | Packed gland | |
|
|
| STEM PACKING | Expanded graphite not less than 98% purity, or firesafe design according to manufacturer's standard | |
|
|
| OUTSIDE TRIM | |
|
|
|
| BOLTING | Material according to EDS | |
|
NBO2 |
| HANDWHEEL | |
AISI 316 AISI 304 |
|
|
| SPECIAL REQUIREMENTS | Wetted parts suitable for sour service to NACE MR0175 | |
|
|
| 044 | END TO END DIMENSION AS FOR GLOBE VALVE. |