| Title : | Piping and Valves | Doc. No. | L-001 | Annex: | E | Valve Data Sheet | BLEC61J |
| Project : | Company : | Rev.Date : | 20.09.99 | Rev. : | 2 | ||
| Valve Type | End To End Standard | End Type 1 | End Type 2 | End Standard | Size From (in) | Size To (in) | Notes |
| BALL VALVE METAL SEAT FULL BORE | ASME B16.10 LONG | RJ | RJ | ASME B16.5 | 2.00 | 24.00 | |
| Notes | ||
| Pressure Rating | CL 900 | |
| Design Code | API 6D | 130 |
| Fire Test | API 6FA OR BS 6755 | |
| General Requirement | VSK V405 | |
| Leak Test | VSK V404 | |
| Marking | VSK V003 | |
| Operator | VSK V004 | |
| Max Design Pressure | Barg | 153.2 | 153.2 | 150.2 | 139.1 | 135.7 | 131.5 |
| At Temperature | Deg. C | -46 | 38 | 50 | 100 | 150 | 200 |
| Subject/Item | Design and Material Requirement | Material | MDS | EDS |
| BODY/BONNET | Split body, bolted | A352 LCC A350 LF2 |
C12 C11 |
|
| INSIDE TRIM | Bi-directional sealing (by seal on both sides of ball). Designed for simultaneous full pressure on both sides of closed valve with no pressure in cavity. Cavity relief by seat "leakage" to inside of valve | |
|
|
| PORT | Full bore | |
|
|
| STEM | Material according to EDS | |
|
NTR1 |
| CLOSURE MEMBER | Trunnion mounted ball (solid); Material according to EDS | |
|
NHF2 NTR1 |
| SEATS | Seat ring; Material according to EDS. Hardfacing | |
|
NHF1 NTR1 |
| SPRINGS | |
UNS N0625 UNS N10276 |
|
|
| SEALS | Packed gland (expanded graphite) or lip seal design and fire seal | |
|
|
| LIP SEAL | Material according to EDS | |
|
NSM1 |
| O-RING | |
|
|
|
| FIRE SEAL | Expanded graphite not less than 98% purity | |
|
|
| OUTSIDE TRIM | Cavity external bleed plug of anti-blowout design | |
|
|
| BOLTING | Material according to EDS | |
|
NBO2 |
| SPECIAL REQUIREMENTS | Wetted parts suitable for sour service to NACE MR0175 | |
|
|
| 130 | DESIGN SHALL ALSO COMPLY TO ASME B16.34. |