| Title : | Piping and Valves | Doc. No. | L-001 | Annex: | E | Valve Data Sheet | BLEC31B |
| Project : | Company : | Rev.Date : | 20.09.99 | Rev. : | 3 | ||
| Valve Type | End To End Standard | End Type 1 | End Type 2 | End Standard | Size From (in) | Size To (in) | Notes |
| BALL VALVE REDUCED BORE TOP ENTRY | API 6D 200 MM PUP PIECE | BE | BE | ASME B16.25 | 2.00 | 4.00 | |
| BALL VALVE REDUCED BORE TOP ENTRY | API 6D 300 MM PUP PIECE | BE | BE | ASME B16.25 | 6.00 | 10.00 | |
| BALL VALVE REDUCED BORE TOP ENTRY | API 6D 400 MM PUP PIECE | BE | BE | ASME B16.25 | 12.00 | 16.00 | |
| BALL VALVE REDUCED BORE TOP ENTRY | API 6D 600 MM PUP PIECE | BE | BE | ASME B16.25 | 18.00 | 24.00 | |
| Notes | ||
| Pressure Rating | CL 900 | |
| Design Code | API 6D | 130 |
| Fire Test | API 6FA OR BS 6755 | |
| General Requirement | VSK V405 | |
| Leak Test | VSK V410 | |
| Marking | VSK V003 | |
| Operator | VSK V004 | |
| Max Design Pressure | Barg | 153.2 | 153.2 | 150.2 | 139.1 | 135.7 |
| At Temperature | Deg. C | -46 | 38 | 50 | 100 | 150 |
| ND (inch) | 2.00 | 3.00 | 4.00 | 6.00 | 8.00 | 10.00 | 12.00 | 14.00 | 16.00 | 18.00 | 20.00 | 24.00 |
| OD (mm) | 60.3 | 88.9 | 114.3 | 168.3 | 219.1 | 273.1 | 323.8 | 355.6 | 406.4 | 457.0 | 508.0 | 610.0 |
| THK (mm) | 8.74 | 11.13 | 11.13 | 14.27 | 18.26 | 21.44 | 25.40 | 27.79 | 30.96 | 29.36 | 32.54 | 38.89 |
| SCH | 160 | 160 | 120 | 120 | 120 | 120 | 120 | 120 | 120 | 100 | 100 | 100 |
| WEIGHT | |
|
|
|
|
|
XXS | |
|
|
|
|
| Subject/Item | Design and Material Requirement | Material | MDS | EDS |
| BODY/BONNET | Top entry, bolted | A352 LCC A350 LF2 |
C12 C11 |
|
| INSIDE TRIM | Bi-directional sealing (by seal on both sides of ball). Designed for simultaneous full pressure on both sides of closed valve with no pressure in cavity. Double piston effect | |
|
|
| PORT | Reduced bore (additional requirement to API 6D) | |
|
|
| STEM | Material according to EDS | |
|
NTR1 |
| CLOSURE MEMBER | Trunnion mounted ball (solid); Material according to EDS | |
|
NTR1 |
| SEATS | Seat ring with soft seat insert; Insert material to be suitable for full pressure and temperature rating. Material according to EDS | |
|
NSS1 NTR1 |
| SPRINGS | |
UNS N0625 UNS N10276 |
|
|
| SEALS | Lip seal/o-ring design and fire seal or packed gland for stem sealing | |
|
|
| LIP SEAL | Material according to EDS | |
|
NSM1 |
| O-RING | Material according to EDS | |
|
NSM1 |
| FIRE SEAL | Expanded graphite not less than 98% purity | |
|
|
| OUTSIDE TRIM | Cavity external bleed plug of anti-blowout design | |
|
|
| BOLTING | Material according to EDS | |
|
NBO2 |
| SPECIAL REQUIREMENTS | Wetted parts suitable for sour service to NACE MR0175 | |
|
|
| 130 | DESIGN SHALL ALSO COMPLY TO ASME B16.34. |