Table Of Contents

Title:

Piping and Valves

Doc. No.

L-001

Annex

F

VSK

V254

Project: NORSOK

Company:

Rev.Date:

 20.09.99

Rev:

3

 

Text

ID

DATE

VSK. TEXTS

109

20.06.94

All valves:

 

 

All components not specified in the VDS shall have equivalent to or better corrosion resistance than the component they are coupled to. Asbestos containing material is not permitted.

 

15.12.97

Carbon steel valves and gearboxes shall as a minimum be primed according to NORSOK standard M-501; "Surface protection and protective coating".

 

20.09.99

Externally exposed components in austenitic stainless steel shall minimum be of type 316 (L) SS.

 

20.09.99

Fabrication welding of pressure retaining components and attachments welded onto those components shall be carried out according to NORSOK Standard M 601, "Welding and Inspection of Piping Systems". Welding of other valve components shall be carried out according to welding procedure specifications to ASME IX.

 

20.09.99

Assembly drawing of the valve shall be supplied with the bid, and shall at least show:

  • All parts of the valve with material standard and grade, MDS when specified in the VDS and manufacturers part number.
  • All welds including hard facing and overlay with reference to applicable welding procedure.
  • Overall dimensions.
  • Weight.
  • Manufacturers name and grade of soft material.

 

20.09.99

All valves with graphite stem packing, desity of graphite to be 1.3 to 1.7 g/cm3.

110

20.06.94

All valves exept check valves:

 

 

The stem or other sliding elements and plugs shall have a hardness and surface finish in order to avoid galling.

116

20.09.99

All Ball/Butterfly:

 

 

Valve shall be inherently antistatic or fitted with an antistatic device. An internally screwed stuffing box is not permitted. The gland packing and gland shall be compressed independently of the stem nut such that rotation of the stem shall not impart forces into the gland or gland packing.

154

20.06.94

All butterfly valves:

 

 

All butterfly valves shall be suitable for throttling duties as well as for service in full open or closed positions.