| Title : | Piping and Valves | Doc. No. | L-001 | Annex: | B | Class | GS70 |
| Project : NORSOK | Company : | Rev.Date : | 20.09.99 | Rev. : | 3 | ||
|
| ||||||||||||||||||
| Design Code | ASME B31.3 |
| Corr. Allow. | 0.0 |
| Wall Thickness Under Tolerance | <=12mm=15%, >12mm=10% |
| Longitudinal Weld Efficiency | 1 |
| ND (mm) | 10.00 | 12.00 | 16.00 | 20.00 | 25.00 | 30.00 | 38.00 |
| OD (mm) | 10.0 | 12.0 | 16.0 | 20.0 | 25.0 | 30.0 | 38.0 |
| THK (mm) | 2.00 | 2.00 | 2.50 | 3.50 | 4.00 | 5.00 | 6.00 |
| SCH | |
|
|
|
|
|
|
| WEIGHT | |
|
|
|
|
|
|
| ITEM TYPE | RANGE FROM TO |
GEOMETRIC STANDARD | EDS/ VDS |
END CONN #1 #2 |
MATERIAL DESCR. | MDS | RATING | SCHD. | NOTES | ||
| TUBE | 10.00 | 38.00 | DIN 2391.C | |
PE | PE | A269 TP316 | |
|
|
|
| BENDING | 10.00 | 38.00 | MADE FROM PIPE | |
|
|
A269 TP316 | |
|
|
|
| ELBOW UNION 90 DEG 24°COMPR FITT | 10.00 | 38.00 | ISO 8434-1 | |
CR | CR | A182 F316 | |
|
|
|
| ELBOW 90 DEG FLANGED | 20.00 | 38.00 | ISO 6162 40 MPA | |
FL SAE | FL SAE | A182 F316 | |
|
|
|
| STRAIGHT TEE UNION 24°COMPR FITT | 10.00 | 38.00 | ISO 8434-1 | |
CR | CR | A182 F316 | |
|
|
|
| STRAIGHT TEE TUBING FLANGED | 20.00 | 38.00 | ISO 6162 40 MPA | |
FL SAE | FL SAE | A182 F316 | |
|
|
|
| REDUCING TEE UNION 24°COMPR FITT | 10.00 | 38.00 | ISO 8434-1 | |
CR | CR | A182 F316 | |
|
|
|
| REDUCING TEE FLANGED | 20.00 | 38.00 | ISO 6162 40 MPA | |
FL SAE | FL SAE | A182 F316 | |
|
|
|
| UNION 24° COMPR FITT | 10.00 | 38.00 | ISO 8434-1 | |
CR | CR | A182 F316 | |
|
|
|
| REDUCING UNION 24°COMPR FITT | 10.00 | 38.00 | ISO 8434-1 | |
CR | CR | A182 F316 | |
|
|
|
| FLANGE | 20.00 | 38.00 | ISO 6162 40 MPA | |
FL SAE | FL SAE | A182 F316 | |
|
|
|
| GASKET O-RING | 10.00 | 38.00 | ISO 8434-1 | |
|
|
FPM/NBR | |
|
|
|
| GASKET O-RING | 20.00 | 38.00 | ISO 6162 40 MPA | |
|
|
FPM/NBR | |
|
|
|
| HEX HEAD PLUG | 10.00 | 38.00 | ASME B16.11 | |
MT | |
A182 F316 | |
6000 LBS | |
|
| HEX SOCKET HEAD SCREW | 20.00 | 38.00 | ISO 6162 40 MPA | |
|
|
A193 B8M CL2 | |
|
|
|
| BALL VALVE FULL BORE | 10.00 | 38.00 | |
BLGS00T | FT | FT | |
|
6000 PSI | |
|
| BALL VALVE FULL BORE | 20.00 | 38.00 | |
BLGS00E | FL SAE | FL SAE | |
|
6000 PSI | |
|
| CHECK VALVE PISTON | 10.00 | 38.00 | |
CHGS00T | FT | FT | |
|
6000 PSI | |
|
| CHECK VALVE PISTON | 20.00 | 38.00 | |
CHGS00E | FL SAE | FL SAE | |
|
6000 PSI | |
|
| 001 | REF. SECTION 6 FOR SERVICES REQUIRING NACE MR0175. |
| 026 | VALVES MAY BE DELIVERED WITH DEDICATED ENDS, WITHOUT ADAPTORS, IN EACH PROJECT. |
| 028 | DUE TO STRESS COROSION CRACKING (SCC) THE CLASS IS LIMITED TO 60 DEG C. HOWEVER, IT IS PERMITTED TO USE THIS CLASS UP TO 100 DEG C, IF NORMAL OPERATING TEMPERATURE IS BELOW 60 DEG C AND CONDITIONS CRITICAL FOR SCC IS NOT PRESENT |
| 029 | OD 10;NPT 1/4", OD 12;NPT 3/8", OD 16;NPT 1/2", OD 20;NPT 3/4", OD 25; NPT 1", OD 30;NPT 1 1/4", OD 38:NPT 1 1/2" |
| 051 | OD 20; FLG 1/2", OD 25;FLG 3/4", OD 30; FLG 1", OD 38;FLG 1 1/4" |