Title :	Piping and Valves	Doc. No.	L-001	Annex:	B	Class	FD30
Project : NORSOK		Company :		Rev.Date :	20.09.99	Rev. :	3

Max Design Pressure at Temperature Pressure (Barg) 258.6 258.5 256.3 245.9 228.9 213.0 200.9 Temperature (Deg. C) -46 38 50 100 150 200 250

Rating CL 1500 Branch Table NBR3 Service Code N-D200

Design Code	ASME B31.3
Corr. Allow.	0.0
Wall Thickness Under Tolerance	<=14"=12.5%, >14"=0.3mm, SEE NOTE 2
Longitudinal Weld Efficiency	1

ND (inch)	0.50	0.75	1.00	1.50	2.00	3.00	4.00	6.00	8.00	10.00	12.00	14.00	16.00	18.00	20.00	24.00
OD (mm)	21.3	26.7	33.4	48.3	60.3	88.9	114.3	168.3	219.1	273.1	323.8	355.6	406.4	457.0	508.0	610.0
THK (mm)	2.77	2.87	3.38	3.68	3.91	5.49	8.56	10.97	15.09	18.26	21.44	23.83	21.44	23.83	26.19	30.96
SCH	40S	40S	40S	40S	40S	40S	80S	80S	100	100	100	100	80	80	80	80
WEIGHT

ITEM TYPE	RANGE FROM TO		GEOMETRIC STANDARD	EDS/ VDS	END CONN #1 #2		MATERIAL DESCR.	MDS	RATING	SCHD.	NOTES
PIPE	0.50	6.00	ASME B36.19M		PE	PE	A790 S32750 SMLS	D51
PIPE	8.00	14.00	ASME B36.10M		PE	PE	A790 S32750 SMLS	D51
PIPE	8.00	24.00	ASME B36.10M		PE	PE	A928 S32750 CL1 OR 3	D52
PIPE NIPPLE 100MM LONG	0.50	0.75	ASME B36.19M		TE	PE	A790 S32750 SMLS	D51		80S
BENDING	0.50	24.00	MADE FROM PIPE	NBE1
CAP	0.50	14.00	ASME B16.9		BE		A815 S32750-S	D53
CAP	16.00	24.00	MSS SP-75		BE		A815 S32750-S	D53
CONCENTRIC REDUCER	0.75	14.00	ASME B16.9		BE	BE	A815 S32750-S/WX	D53
CONCENTRIC REDUCER	16.00	24.00	MSS SP-75		BE	BE	A815 S32750-WX	D53
ECCENTRIC REDUCER	0.75	14.00	ASME B16.9		BE	BE	A815 S32750-S/WX	D53
ECCENTRIC REDUCER	16.00	24.00	MSS SP-75		BE	BE	A815 S32750-WX	D53
ELBOW LONG RADIUS 45 DEG	0.50	14.00	ASME B16.9		BE	BE	A815 S32750-S/WX	D53
ELBOW LONG RADIUS 45 DEG	16.00	24.00	MSS SP-75		BE	BE	A815 S32750-WX	D53
ELBOW LONG RADIUS 90 DEG	0.50	14.00	ASME B16.9		BE	BE	A815 S32750-S/WX	D53
ELBOW LONG RADIUS 90 DEG	16.00	24.00	MSS SP-75		BE	BE	A815 S32750-WX	D53
STRAIGHT TEE	0.50	14.00	ASME B16.9		BE	BE	A815 S32750-S/WX	D53
STRAIGHT TEE	16.00	24.00	MSS SP-75		BE	BE	A815 S32750-WX	D53
REDUCING TEE	0.75	14.00	ASME B16.9		BE	BE	A815 S32750-S/WX	D53
REDUCING TEE	16.00	24.00	MSS SP-75		BE	BE	A815 S32750-WX	D53
WELDOLET	2.00	24.00	NORSOK EDS	NOL1	BE	BE	A182 S32750	D54
REINFORCED NIPOFLANGE	2.00	24.00	NORSOK EDS	NOL1	BE	RJ	A182 S32750	D54
BLIND FLANGE	0.50	24.00	ASME B16.5		RJ		A182 S32750	D54
BLIND FLANGE	0.50	24.00	ASME B16.5		RJ		A240 S32750	D55
WELDNECK FLANGE	0.50	24.00	ASME B16.5	NAF1	RJ	BE	A182 S32750	D54
WELDNECK ORIFICE FLANGE	1.00	6.00	ASME B16.36	NAF1	RJ	BE	A182 S32750	D54
SPECTACLE BLIND	0.50	8.00	NORSOK EDS	NLB1	RJ	RJ	A182 S32750	D54
SPECTACLE BLIND	0.50	8.00	NORSOK EDS	NLB1	RJ	RJ	A240 S32750	D55
SPADE	10.00	24.00	NORSOK EDS	NLB1	RJ	RJ	A182 S32750	D54
SPADE	10.00	24.00	NORSOK EDS	NLB1	RJ	RJ	A240 S32750	D55
SPACER	10.00	24.00	NORSOK EDS	NLB1	RJ	RJ	A182 S32750	D54
SPACER	10.00	24.00	NORSOK EDS	NLB1	RJ	RJ	A240 S32750	D55
GASKET OCTAGONAL RING	0.50	24.00	ASME B16.20	NGA3			6MO
MECHANICAL JOINT BLIND HUB	2.00	24.00	MANUFACTURERS STANDARD	NMJ1			A182 S32750	D54
MECHANICAL JOINT HUB	2.00	24.00	MANUFACTURERS STANDARD	NMJ1	BE		A182 S32750	D54
MECHANICAL JOINT CLAMP	2.00	24.00	MANUFACTURERS STANDARD	NMJ1			A788 AISI 4140	X02			061
MECHANICAL JOINT SEAL RING	2.00	24.00	MANUFACTURERS STANDARD	NMJ1			17-4 PH PTFE COAT
BLIND FLANGE COMPACT	2.00	24.00	MANUFACTURERS STANDARD		CJ		A182 S32750	D54
COMPACT FLANGE	2.00	2.00	MANUFACTURERS STANDARD		CJ	BE	A182 S32750	D54
SPACER COMPACT TYPE	2.00	24.00	MANUFACTURERS STANDARD		CJ	CJ	A182 S32750	D54
SPACER COMPACT TYPE	2.00	24.00	MANUFACTURERS STANDARD		CJ	CJ	A240 S32750	D55
HEX HEAD PLUG	0.50	1.00	ASME B16.11		MT		A182 S32750		6000 LBS
SPADE COMPACT TYPE	2.00	24.00	MANUFACTURERS STANDARD		CJ	CJ	A182 S32750	D54
SPADE COMPACT TYPE	2.00	24.00	MANUFACTURERS STANDARD		CJ	CJ	A240 S32750	D55
STUD BOLT C/W NUTS	0.50	24.00	ASME B16.5	NBO1			A193 B7/A194 2H
SEAL RING FOR COMPACT FLANGE	2.00	24.00	MANUFACTURERS STANDARD		CJ	CJ	17-4 PH PTFE COAT
BALL VALVE METAL SEAT FULL BORE	2.00	24.00		BLFD61K	CJ	CJ			CL 1500
BALL VALVE METAL SEAT FULL BORE	2.00	24.00		BLFD61C	CL	CL			CL 1500
BALL VALVE METAL SEAT FULL BORE	2.00	24.00		BLFD61J	RJ	RJ			CL 1500
BALL VALVE METAL SEAT FULL BORE TOP ENTRY	2.00	24.00		BLFD61B	BE	BE			CL 1500
BALL VALVE METAL SEAT REDUCED BORE	3.00	24.00		BLFD51K	CJ	CJ			CL 1500
BALL VALVE METAL SEAT REDUCED BORE	3.00	24.00		BLFD51C	CL	CL			CL 1500
BALL VALVE METAL SEAT REDUCED BORE	3.00	24.00		BLFD51J	RJ	RJ			CL 1500
BALL VALVE METAL SEAT REDUCED BORE TOP ENTRY	3.00	24.00		BLFD51B	BE	BE			CL 1500
BALL VALVE NON CONTACT	2.00	24.00		BLFD81B	BE	BE			CL 1500
BALL VALVE NON CONTACT	2.00	24.00		BLFD81K	CJ	CJ			CL 1500
BALL VALVE NON CONTACT	2.00	24.00		BLFD81C	CL	CL			CL 1500
BALL VALVE NON CONTACT	2.00	24.00		BLFD81J	RJ	RJ			CL 1500
BALL VALVE REDUCED BORE	3.00	24.00		BLFD31J	RJ	RJ			CL 1500		074
BALL VALVE REDUCED BORE TOP ENTRY	3.00	24.00		BLFD31B	BE	BE			CL 1500		074
GATE VALVE THROUGH CONDUIT DOUBLE EXPANDING	2.00	24.00		GTFD71B	BE	BE			CL 1500		069
GATE VALVE THROUGH CONDUIT DOUBLE EXPANDING	2.00	24.00		GTFD71K	CJ	CJ			CL 1500		069
GATE VALVE THROUGH CONDUIT DOUBLE EXPANDING	2.00	24.00		GTFD71C	CL	CL			CL 1500		069
GATE VALVE THROUGH CONDUIT DOUBLE EXPANDING	2.00	24.00		GTFD71J	RJ	RJ			CL 1500		069
GATE VALVE THROUGH CONDUIT DOUBLE EXPANDING REVERSED PORT	2.00	24.00		GTFD73C	CL	CL			CL 1500		069
GATE VALVE THROUGH CONDUIT SLAB	2.00	24.00		GTFD41B	BE	BE			CL 1500		069
GATE VALVE THROUGH CONDUIT SLAB	2.00	24.00		GTFD41K	CJ	CJ			CL 1500		069
GATE VALVE THROUGH CONDUIT SLAB	2.00	24.00		GTFD41C	CL	CL			CL 1500		069
GATE VALVE THROUGH CONDUIT SLAB	2.00	24.00		GTFD41J	RJ	RJ			CL 1500		069
GATE VALVE THROUGH CONDUIT SLAB REVERSED PORT	2.00	24.00		GTFD43C	CL	CL			CL 1500		069
GATE VALVE WEDGE	0.50	1.00		GTFD01D	BE	FT			CL 1500
GATE VALVE WEDGE	0.50	1.50		GTFD01B	BE	BE			CL 1500
GATE VALVE WEDGE	0.50	1.50		GTFD01J	RJ	RJ			CL 1500
GATE VALVE WEDGE	2.00	24.00		GTFD11B	BE	BE			CL 1500
GATE VALVE WEDGE	2.00	24.00		GTFD11K	CJ	CJ			CL 1500
GATE VALVE WEDGE	2.00	24.00		GTFD11C	CL	CL			CL 1500
GATE VALVE WEDGE	2.00	24.00		GTFD11J	RJ	RJ			CL 1500
GLOBE VALVE SWIVELLING	0.50	1.50		GBFD01B	BE	BE			CL 1500
GLOBE VALVE SWIVELLING	0.50	1.50		GBFD01J	RJ	RJ			CL 1500
GLOBE VALVE SWIVELLING	2.00	6.00		GBFD11B	BE	BE			CL 1500
GLOBE VALVE SWIVELLING	2.00	6.00		GBFD11J	RJ	RJ			CL 1500
CHECK VALVE DUAL WAFER	2.00	24.00		CHFD51C	CL	CL			CL 1500
CHECK VALVE DUAL WAFER	2.00	24.00		CHFD51J	RJ	RJ			CL 1500
CHECK VALVE PISTON	0.50	1.50		CHFD01B	BE	BE			CL 1500
CHECK VALVE PISTON	0.50	1.50		CHFD01J	RJ	RJ			CL 1500
PLUG VALVE	2.00	24.00		PGFD41B	BE	BE			CL 1500
PLUG VALVE	2.00	24.00		PGFD41K	CJ	CJ			CL 1500
PLUG VALVE	2.00	24.00		PGFD41C	CL	CL			CL 1500
PLUG VALVE	2.00	24.00		PGFD41J	RJ	RJ			CL 1500
DOUBLE BLOCK AND BLEED	0.75	1.00		CBFD01D	RJ	FT			CL 1500		074
DOUBLE BLOCK AND BLEED	1.00	3.00		CBFD11J	RJ	RJ			CL 1500		074

Notes :

001	REF. SECTION 6 FOR SERVICES REQUIRING NACE MR0175.
002	THE WALL THICKNESS TOLERANCE IS USED FOR DESIGN AND IS NOT PART OF THE PURCHASE SPECIFICATION WHEN DEVIATING FROM THE INDIVIUAL PIPING ITEMS.
008	IF THE OPERATIONAL TEMP. IS ABOVE 120 DEG C, SPECIAL CARE SHALL BE TAKEN TO AVOID CHLORIDE STRESS CORROSION CRACKING.
061	CLAMP TYPE MECHANICAL JOINT IS LIMITED TO -30 DEG C.
063	FOR CLAMP TYPE LINE BLINDS, USE INTEGRAL WITH SEAL RING TYPE AS DESIGNED BY MANUFACTURER.
069	FOR GAS SERVICE IS SEAT SKIRT NOT NECESSARY.
074	MAX. 120 DEG C.