| Title: | Piping and Valves | Doc. No. | L-001 | Chapter | 2 |
||
| Project: NORSOK | Company: | Rev.Date: | 20.09.99 | Rev: | 3 |
||
The following standards include provisions which, through reference in this text, constitute provisions of this NORSOK standard. Latest issue of the references shall be used unless otherwise agreed. Other recognized standards may be used provided it can be shown that they meet or exceed the requirements of the standards referenced in this standard.
The reference standards are specified in the following clauses and the individual data sheets.
| ANSI B1.1 | Unified Inch Screw Threads |
| ANSI/SAE J518 | Hydraulic Flanged Tube, Pipe and Hose Connections, Four-Bolt Split Flange Type |
| API 594 | Check Valves: Wafer-Lug, and Double Flange Type |
| API 598 | Valve Inspection and Testing |
| API 599 | Metal Plug Valves Flanged and Welding Ends |
| API 600 | Steel Gate Valves – Flanged and Butt-Welding Ends |
| API 602 | Compact Steel Gate Valves – Flanged, Threaded, Welding, and Extended Body Ends |
| API 609 | Lug – and Wafer – Type Butterfly Valves |
| API 6A | Specification for Wellhead and Christmas Tree Equipment |
| API 6BX | Volume Correction Factor |
| API 6D | Specification for Pipeline Valves (Gate; Plug, Ball, and Check Valves) |
| API 6FA | Specification for Fire Tests for Valves |
| ASME B1.20.1 | Pipe Threads, General Purpose |
| ASME B16.10 | Face-to-Face and End-to-End Dimension of Valves |
| ASME B16.11 | Forged Fittings, Socket-Welding and Threaded |
| ASME B16.20 | Metallic Gaskets for Pipe Flanges – Ring Joint, Spiral Wounds and Jacketed |
| ASME B16.21 | Nonmetallic Flat Gaskets for Pipe Flanges |
| ASME B16.25 | Buttwelding Ends |
| ASTM B16.34 | Valves – Flanged, Threaded and Welding Ends |
| ASME B16.36 | Orifice Flanges |
| ASME B16.5 | Pipe Flanges and Flanged Fittings |
| ASME B16.9 | Factory-Made Wrought Steel Buttwelded Fittings |
| ASME B18.2.2 | Square and Hex Nuts |
| ASME B31.3 | Process Piping |
| ASME B36.10 | Welded and Seamless Wrought Steel Pipes |
| ASME B36.19 | Stainless Steel Pipes |
| ASME IX BPVC Section 9. | Welding and Brazing Qualification |
| ASME VIII | ASME Boiler and Pressure Vessel Code. |
| ASTM A123 | Specification Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products |
| ASTM A153 | Specification for Zinc Coating |
| ASTM A182 | Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High Temperature Service |
| ASTM A193 | Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature Service |
| ASTM A194 | Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure and High-Temperature Service |
| ASTM A320 | Specification for Alloy-Steel Bolting Materials for Low Temperature Service |
| ASTM A351 | Specification for Steel Castings, Austenitic, for High Temperature Service |
| ASTM A564 | Specification for Hot-Rolled and Cold-Finished Age Harding Stainless and Heat Resisting Steel Bares, Wire and Shapes |
| ASTM A705 | Specification for Age-Harding Stainless and Heat Resisting Steel Forgings |
| ASTM D2240 | Test Methods for Rubber Property – Durometer Hardness |
| ASTM F36 | Test Methods for Compressibility and Recovery of Gasket Materials |
| ASTM F467 | Specification for Nonferrous Nuts for General Use |
| ASTM F468 | Specification for Nonferrous Bolts, Hexlap Screws, and Studs for General Use |
| ASTM G48 | Test Methods for Fittings and Crevice Corrosion Resistance of Stainless Steel and Related Alloys by use of Ferric Chloride Solutions |
| BS 1832 | Specification for Compressed Asbestos Fibre Jointing |
| BS 1868 | Specification for Check Valves (flanged and buttwelding ends) for the Petroleum, Petrochemical and allied Industries |
| BS 1873 | Specification for Steel Globe and Globe Stops and Check Valves (Flanged and Butt-Welding Ends) for the Petroleum, Petrochemical and allied Industries |
| BS 3799 | Specification for Steel Pipe Fittings, Screwed and Socket-Welding for the Petroleum Industry |
| BS 5155 | Specification for Butterfly Valves |
| BS 5351 | Specification for Steel Ball Valves for the Petroleum, Petrochemical and allied Industries |
| BS 5352 | Specification for Steel Wedge Gate, Globe and Check Valves 50mm and Smaller for the Petroleum, Petrochemical and allied Industries |
| BS 6755-1 | Testing of Valves. Specification for Production Pressure Testing |
| BS 6755-2 | Testing of Valves. Specification for Fire Type Testing |
| DIN 2391 | Nahtlose Präzisionsstahlrohre mit besonderer Massengenaugkeit – Teil 1 Masse |
| EN 10204 | Metallic Products – Types of Inspection Documents |
| ISO 4200 | Plain End Steel Tubes, Welded and Seamless |
| ISO 5210 | Industrial Valves – Multi Turn Valve Actuator Attachments |
| ISO 5211 | Part-Turn Valve Actuator Attachment |
| ISO 5752 | Metal Valves for Use in Flanged Pipe Systems |
| ISO 8434-1 | Metallic Tube Connections Fluid Power and General Use. Part 1: 24 Degree Compression Fittings |
| MSS-SP-25 | Standard Marking Systems for Valves, Fittings, Flanges and Unions |
| MSS-SP-44 | Steel Pipeline Flanges |
| MSS-SP-75 | Specification for High Test Wrought Butt Welding Fittings |
| MSS-SP-97 | Integrally Reinforced Forged Branch Outlet Fittings – Socket Weldings, Threaded and Buttwelding Ends |
| NACE MR0175 | Sulfide Stress Cracking Resistant Metallic Materials for Oilfield Equipment |