WS 98
WS 312
WS 316
WS 316 SE
WS Porti
WS InlineCut

InformationBrochuresContact us

The WS 98 is a sampler of uncompromising WaterSam quality and performance designed to be a compact and economical unit for simpler sampling applications.
It can also be very well equipped with a variety of available options if desired.

The WS 98 can be either mounted on an existing wall or on an optional support frame and XY Distributor which enables a large variety of sample bottle combinations. Just as with the largest WaterSam samplers, as many as 48 1-litre bottles can be accommodated.

Although designed for indoor applications, the WS 98 is standard-equipped with a high-grade stainless steel housing (AISI 316Ti) and IP65 protection for the controller and technical compartment, making it suitable for a variety of challenging environments.

The vacuum sampling system in the WS 98 ensures maximum accuracy and can draw samples from depths of up to 7 metres, or up to 30 metres with optional equipment. Several optional sampling systems designed for specific applications are available, and can even be operated in pairs to create a double sampler.

If an inexpensive solution for composite sample refrigeration is needed, the WS 98 can be combined with a common household refrigerator.

The WS 98 can also be used to retrofit an old or defective sampler cabinet from another manufacturer by utilizing the WS 98 as a replacement controller and sampling system.

The WS 98 provides you with a compact, flexible and high-value sampler with capabilities which can be expanded at any time in the future.

Ketil Johansen

Salg & Service
M: +47 901 20 590
E: This email address is being protected from spambots. You need JavaScript enabled to view it.
Dept: Larvik

Per Enok Hanssen

Sales Manager Instrumentation
T: +47 33 19 29 15
M: +47 922 66 456
E: This email address is being protected from spambots. You need JavaScript enabled to view it.
Dept: Larvik

InformationBrochuresContact us

The WS 312 is a stationary water sampler which puts WaterSam® quality, performance and reliability into a compact and economical package.

Designed for both indoor and outdoor use, the WS 312 features robust stainless steel construction throughout and a climate-control system which keeps samples at the optimal temperature, even in ambient conditions from -25°C up to 42°C (-13°F to 108°F).

The vacuum sampling system standard in the WS 312 ensures maximum accuracy and can draw samples from depths of up to 8 metres (26 ft). Several optional sampling systems are available which are designed for specific applications. The borosilicate glass dosing vessel is located within the climate-controlled storage chamber to protect the contents from being affected by outside temperatures and light. With no wearing parts coming into contact with the sample medium, the vacuum sampling system offers consistency and reliability with minimal maintenance.

Despite the diminutive size of the WS 312, numerous different sample bottle combinations can be used with the XY Distributor, including a set of 24 x 1-litre bottles. Without a distributor a composite sample container with a capacity of up to 26.4 litres can be used.

With a variety of options available to choose from, the WS 312 can be equipped to create a sampler which meets your requirements while retaining its small footprint.

Ketil Johansen

Salg & Service
M: +47 901 20 590
E: This email address is being protected from spambots. You need JavaScript enabled to view it.
Dept: Larvik

Per Enok Hanssen

Sales Manager Instrumentation
T: +47 33 19 29 15
M: +47 922 66 456
E: This email address is being protected from spambots. You need JavaScript enabled to view it.
Dept: Larvik

InformationBrochuresContact us

The WS 316 is the comprehensive stationary water sampler from WaterSam, which offers the largest sample storage capacity and the widest array of options and equipment for specialized applications.

The WS 316 is also manufactured with a robust, insulated stainless steel cabinet. The controller-monitored climate control system ensures that samples are stored at the desired temperature (adjustable, preset to 3°C) with a high degree of accuracy, in temperatures from -25°C to +42°C. With the optional heavy-duty refrigeration unit, samples are safe even when ambient temperatures reach +55°C. The WS 316 is suitable for both indoor and outdoor applications. The standard vacuum sampling system in the WS 316 ensures maximum accuracy and can draw samples from depths of up to 8 metres, or up to 30 metres with optional equipment. If a vacuum sampling system is not appropriate, any of our other sampling systems can be selected and incorporated with this model. The sampling system is located inside the sample storage chamber, thereby preventing the sampled medium from being heated in the summer, over-chilled in the winter, or affected by light. The WS 316 can also be equipped as a double sampler with a second sampling system.

With the XY Distributor, a large variety of different bottle combinations can be filled, including a set of 49 x 1-litre bottles. Without a distributor a composite sample container with a capacity of up to 60 litres can be used.

The WS 316 can be custom-equipped to match your individual sampling requirements. The range of options available consists of sampling system upgrades, software and communication add-ons as well as features to increase user comfort and convenience. No other sampler is as flexible as the WS 316.

Ketil Johansen

Salg & Service
M: +47 901 20 590
E: This email address is being protected from spambots. You need JavaScript enabled to view it.
Dept: Larvik

Per Enok Hanssen

Sales Manager Instrumentation
T: +47 33 19 29 15
M: +47 922 66 456
E: This email address is being protected from spambots. You need JavaScript enabled to view it.
Dept: Larvik

InformationBrochuresContact us

The special feature of the WS 316 SE is the fully-automated sample bottle emptying and rinsing with clean water.
For sampling operations in remote locations, or for applications where samples are not usually needed or desired (e.g.: monitoring by a water quality authority), a self-emptying sampler offers the solution. The most recent samples — up to 24 — are always available.
For surveillance applications where the sampler is locked in order to restrict access, an optional window in the door is available. This permits observing of the sampling operation without needing to open the door. Monitoring of the bottle fill levels is also possible. The WS 316 SE is manufactured with a robust stainless steel housing. As with the standard WS 316, the temperature in the sample storage chamber is freely adjustable (preset at 3°C), and samples are reliably kept at the optimal temperature in ambient conditions from -25°C to +42°C.
With the optional heavy-duty refrigeration system, the optimal temperature can be maintained even when the ambient temperature rises to +55°C.
The WS 316 SE is suitable for both indoor and outdoor applications.
The standard VAC vacuum sampling system or other sampling system is positioned in the climate-controlled sample storage chamber, protecting it from heating up in the summer, freezing in the winter, and being affected by light.
The WS 316 SE can be equipped with a sample container in the middle of the bottle carousel for additional samples, such as a large composite sample for a water quality authority or for multiple inspections. It may also be used for event-proportional samples. This way, regular samples as well as samples documenting events are always on hand. A signal indicating such an event can also be sent.
There are a variety of bottle carousel distributor systems to choose from, from 4 to 24 bottles, and a simple system for 2 PE bottles is also available. Samples can be manually retrieved for analysis with the push of a button. The samples then flow directly from their respective bottles into a container. The samples do not flow through any additional components, thereby eliminating cross-contamination.
If samples are not retrieved, the bottles are automatically emptied and rinsed before being filled again at the appropriate time.

Ketil Johansen

Salg & Service
M: +47 901 20 590
E: This email address is being protected from spambots. You need JavaScript enabled to view it.
Dept: Larvik

Per Enok Hanssen

Sales Manager Instrumentation
T: +47 33 19 29 15
M: +47 922 66 456
E: This email address is being protected from spambots. You need JavaScript enabled to view it.
Dept: Larvik

InformationBrochuresContact us

The WS Porti is a portable water sampler which puts WaterSam quality, performance and reliability into a compact and mobile package.

Designed for both indoor and outdoor use, the WS Porti features robust stainless steel construction throughout and IP65 protection for the controller and electronics.

The vacuum sampling system standard in the WS Porti ensures maximum accuracy and can draw samples from depths of up to 7 metres, or up to 13 metres with optional equipment. The borosilicate glass metering vessel is safely located in the center of the sampler, while an optional lockable cover plate is available to provide further protection if needed. With no wearing parts coming into contact with the sample medium, the vacuum sampling system offers consistency and reliability with minimal maintenance.

A peristaltic pump is also available as an optional sampling system for the WS Porti.

The WS Porti is compatible with a range of sample transport boxes and coolers which can be easily swapped. Having an extra cooler or transport box with bottles allows continuous sampling on location while the full set of bottles is brought to the laboratory.

The WS Porti is available for composite sampling or discrete sampling.

Ketil Johansen

Salg & Service
M: +47 901 20 590
E: This email address is being protected from spambots. You need JavaScript enabled to view it.
Dept: Larvik

Per Enok Hanssen

Sales Manager Instrumentation
T: +47 33 19 29 15
M: +47 922 66 456
E: This email address is being protected from spambots. You need JavaScript enabled to view it.
Dept: Larvik

InformationVideoerContact us

Sampling System WS INLINEcut®

The WS INLINEcut® is designed for sampling from pressurized lines of up to 10 bar.

Targeted turbulences when sampling ensure a representative sample. As excess sample medium is avoided, there is no need for a drain to be installed.

This system can be used for time-, volume- and event-proportional sampling, and draws a sample of 20, 36 or 54 ml. Larger sample volumes can also be created by drawing multiple samples in succession.

The WS INLINEcut® is suitable for sampling pure/ultrapure to very dirty water/wastewater, as well as sludge and oily substances.

It may be operated either by a WaterSam controller or by an existing PLC or other control system on site. Simple manual operation by means of a pneumatic switch or button eliminates the need for an automatic controller.

The WS INLINEcut® is optionally available with ATEX Certification II2GcT4 -20°C ≤ Ta ≤ +60°C.

Ketil Johansen

Salg & Service
M: +47 901 20 590
E: This email address is being protected from spambots. You need JavaScript enabled to view it.
Dept: Larvik

Per Enok Hanssen

Sales Manager Instrumentation
T: +47 33 19 29 15
M: +47 922 66 456
E: This email address is being protected from spambots. You need JavaScript enabled to view it.
Dept: Larvik

Siste nyheter

Problem and solution: Water hammer
Nyheter

COVID-19

Mar 17, 2020
Most of our employees are now working from home. Our head office is ...
Nyheter

VA Tour Norway 2020

Feb 27, 2020
Come and meet us at this year's VA Tour Norway where we will be presenting…
Per Enok Hanssen
Nyheter

BIAR - World-class sampling systems and equipment

Feb 17, 2020
BIAR sampling systems are designed for testing of liquids and gases and…
Per Enok Hanssen
Nyheter

Agreement between J.S. Cock and VEGA Norway

Jan 08, 2020
J.S.Cock is proud to present the latest member of our supplier pool: VEGA…
Per Enok Hanssen
Nyheter

InLine Prosess AS innfusjonert i J.S. Cock AS

Dec 17, 2019
InLine Prosess AS og J.S.Cock AS har siden 2015 hatt et svært godt…
© 1897-2020 J.S.Cock AS. All Rights Reserved.