From Sampling Systems
From Dinnissen
InformationVideoBrochuresContact us

The FreeGlide® is a highly innovative sampler that has been developed by Sampling Systems. The FreeGlide is able sample powder as it falls down a pipe. After sampling, the sample is dropped down the chute into a bottle or other container.

The FreeGlide® Powder Sampler is the only in-line sampling device that is guaranteed not to stick or jam during operation. The special diaphragm within the sampler keeps the powder away from the moving parts.

  • Guaranteed not to get stuck during operation
  • Suitable for in-line sampling of both free flowing and cohesive powders
  • Automatic and manual versions available
  • Can be retro-fitted to existing equipment
  • Made from hygienic stainless steel
  • Sampler can be quickly and easily stripped down for cleaning
  • ATEX rated versions available (EX II 2GD T4)

The FreeGlide Powder Sampler is available either manually operated (as shown above) or else it can be fitted with a pneumatic actuator.

 

Per Enok Hanssen

Sales Manager Instrumentation
T: +47 33 19 29 15
M: +47 922 66 456
E: This email address is being protected from spambots. You need JavaScript enabled to view it.
Dept: Larvik

Knut Erik Boland

Produktsjef Instrument
T: +47 33 19 29 15
M: +47 926 46 906
E: This email address is being protected from spambots. You need JavaScript enabled to view it.
Dept: Larvik

InformationBrochuresContact us

Consistent and accurate sampling delivers added value

Companies in the food, feed, pharma and chemical sectors which need to take reliable and accurate samples were until recently dependent uponmanual sampling, which is much more labour-intensive and generally less efficient and reliable than automated sampling. Dinnissen Process Technology has  developed a completely new and fully automated sampling system which complies with the most recent criteria of the EHEDG (European Hygienic Engineering & Design Group) and can be used for the automated sampling of incoming, stationary and outgoing product flows.

Taking samples with the right frequency, volume and weight in continuous as well as batch production processes

Companies have to comply with increasingly rigorous requirements in the areas of safety and quality. The sampling of incoming flows of ingredients, intermediate products, and outgoing product flows is critical when it comes to determining microbiological or other quality parameters. The ability to sample these flows consistently, accurately and representatively greatly increases the value of the resulting information, which is why Dinnissen Process Technology has developed an automated sampling system that meets all these requirements. The system can be used for continuous as well as batch production processes based on dry powders, granules or granulates. All the user has to do is choose the desired parameters - such as frequency, volume and weight - beforehand, and the system automatically takes the required samples quickly, accurately and efficiently. The samples are collected in a laboratory beaker or sampling bag held in place by a quick-release tri-clamp fitting. Sampling capacity ranges from 25 g to 1000 g per sample, and the system can be integrated into new as well as existing production lines in a wide range of environments, including filling lines, silos, transport systems, mixing and packaging installations etc. The design allows the entire system to be easily, quickly and thoroughly cleaned, thereby eliminating the risk of contamination of the product or sampling flow.

A practical and highly efficient solution for difficult situations

Dinnissen's new and innovative automatic sampling system not only improves the reliability and accuracy of sampling processes, it also offers a much less labour-intensive solution when samples have to be taken in locations that are difficult to access, in continuous production processes, and in other difficult to manage situations.

 

Per Enok Hanssen

Sales Manager Instrumentation
T: +47 33 19 29 15
M: +47 922 66 456
E: This email address is being protected from spambots. You need JavaScript enabled to view it.
Dept: Larvik

Knut Erik Boland

Produktsjef Instrument
T: +47 33 19 29 15
M: +47 926 46 906
E: This email address is being protected from spambots. You need JavaScript enabled to view it.
Dept: Larvik

Siste nyheter

Problem and solution: Water hammer
Nyheter

COVID-19

Mar 17, 2020
Most of our employees are now working from home. Our head office is ...
Nyheter

VA Tour Norway 2020

Feb 27, 2020
Come and meet us at this year's VA Tour Norway where we will be presenting…
Per Enok Hanssen
Nyheter

BIAR - World-class sampling systems and equipment

Feb 17, 2020
BIAR sampling systems are designed for testing of liquids and gases and…
Per Enok Hanssen
Nyheter

Agreement between J.S. Cock and VEGA Norway

Jan 08, 2020
J.S.Cock is proud to present the latest member of our supplier pool: VEGA…
Per Enok Hanssen
Nyheter

InLine Prosess AS innfusjonert i J.S. Cock AS

Dec 17, 2019
InLine Prosess AS og J.S.Cock AS har siden 2015 hatt et svært godt…
© 1897-2020 J.S.Cock AS. All Rights Reserved.